Description
IND-C80A-ESC Cobra 80A ESC w/6A Switching BEC
Cobra 80A ESC w/6A Switching BEC
Features:
- Easy Set-up and Operation
- Basic Programming available through Throttle Stick
- Throttle Range automatically detected and set for smooth, linear throttle response
- Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
- Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po battereis, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for LiFe batteries
- LVC type can be set to Hard Cut-off or Power Reduction Mode
- Three different brake levels, Hard, Medium or Off
- Three different timing modes, High, Low and Auto
- Three different Motor Acceleration Rates, High, Medium and Low οΎ• Safe Start-Up: The ESC will not arm until the throttle is in the idle position
- Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
- PWM Frequency is set to 8KHz for best operation on a wide range of motors
- Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
- Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.
Specifications:
Weight (With Output Connectors) ................. 60.1 grams (2.12 oz)
Max Continuous Current ............................................... 80 Amps
Burst Current rating (15s) ........................................... 100 Amps
Operating Voltage Range ......................................... 6 to 26 Volts
Number of Li-Po cells ................................................. 2 to 6 cells
Number of Ni-XX cells .............................................. 6 to 20 cells
Number of Li-Fe cells ................................................. 2 to 7 cells
BEC Output .................................................. 6 amps @ 5.5 Volts
ESC Size (inc. Caps) ........ 72 x 33 x 14mm (2.83 x 1.30 x 0.55 in)
Additional Information
ESC Max Amps: |
80A to 99A |
ESC Max Voltage: |
22.2V to 29.5V |
ESCs & BECs: |
Brushless ESC |