IND-C22A-ESC Cobra 22A ESC with 2A Linear BEC

IND-C22A-ESC Cobra 22A ESC with 2A Linear BEC

Cobra Speed Controller Features

• Easy Set-up and Operation
• Basic Programming available through Throttle Stick
• Throttle Range automatically detected and set for smooth, linear throttle response
• Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
• Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
• LVC type can be set to Hard Cut-off or Power Reduction Mode
• Three different brake levels, Hard, Medium or Off
• Three different timing modes, High, Low and Auto
• Three different Motor Acceleration Rates, High, Medium and Low
• Safe Start-Up: The ESC will not arm until the throttle is in the idle position
• Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
• PWM Frequency is set to 8KHz for best operation on a wide range of motors
• Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
• Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.

Cobra 22 Amp ESC Specifications

Weight (Without Connectors) 24.2 grams (0.85 oz)
Max Continuous Current 22 Amps
Burst Current rating (15s) 28 Amps
Operating Voltage Range 6 to 12 Volts
Number of Li-Po cells 2 to 3 cells
Number of Ni-XX cells 6 to 10 cells
Number of Li-Fe cells 2 to 3 cells
Linear BEC Output 2 amps @ 5.0 Volts
ESC Size (Inc. Caps, in mm) 44 x 24 x 10
ESC Size (Inc. Caps, in inches) 1.73 x 0.94 x 0.39