GTP1GT0106 GT POWER LED Servo Tester

GTP1GT0106 KAVAN LED Servo Tester

Miniature servo tester for setting neutral (pulse width 1.5 ms) up to 4 servos at the same time and testing servo operation (signal in the range 0.7-2.3 ms) manually or automatically with control pulse width display on a three-digit LED display. Power supply 4.8-6 V.

Miniature servo tester for setting the neutral of up to 4 servos at the same time and testing the operation of the servos or the function of the electronic speed regulators manually or automatically with the display of the width of the control pulses on the three-digit LED display. The LED servo tester generates a control signal with pulses with a repetition frequency of 50 Hz (alternation of 20 ms) with a logic "1" level of 3.3 V and has three basic operating modes switched by a button:

• Manual adjustment of the servo position using a rotary knob (control pulse width range 700-2,300 µs).
• Setting the neutral position – control pulse width 1500 µs (1.5 ms).
• Automatic testing of servo movement (control pulse width range 800-2200 µs).

To power the servo tester for servo testing, you will need a 4-5 cell NiMH/NiCd battery or a UBEC power stabilizer (5-6 V). No additional power supply is required when testing speed controllers with BEC; in the case of regulators without BEC ("Opto"), an external source must be connected to the servo tester as for servo testing.

Package contents: LED servo tester, instructions.