Description
BC3PKMINI BEACON Foam-Tac Mini Foam & Plastic Glue - 3 Pack
Description
Foam-Tac's improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We've also added a special adhesion promoter to make the glue even stronger and more durable than before. Foam-Tac is the perfect solution for permanently bonding many types of foams including Depron & BlueCor as well as carbon fiber, balsa and plywood, plastics, and more. Foam-Tac dries clear, remains flexible, won't foam, and can glue control surfaces directly onto the RC airframe without hinge tape or any other kind of fastener.
*For RC Builders – Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.
NOW AVAILABLE in mini tubes
Directions: All Surfaces must be clean and dry. Spread glue evenly on both sides of material to be bonded. All to air dry for a few seconds, press together and immediately pull apart. Wait a few seconds more and firmly press together and immediately pull apart. Wait a few seconds more and firmly press together for a permanent bond. Maximum bond is achieved within 24 hours or less.
Materials it bonds: Bonds all types of foam & plastics, smooth foam, rough foam, Styrofoam, Carbon Fiber, Depron, Balsa Wood & More
Cure Time: 24 Hours
