TRA136454-4RED TRAXXAS 1/10 Stampede 2WD Brushless Monster Truck - Red

Body Reinforcements - Stampede comes battle-hardened and ready for action with large injection-molded front grille and rear tailgate body reinforcements.  Not only do the reinforcements look great, but they also provide a large mounting point for the clipless latches to spread out impact forces.

Black Monster Truck Wheels - Large 2.8" monster truck wheels with removable center insert help give Stampede its towering stance.  Front and rear wheel offsets are the same, eliminating the need for separate wheel & tire sets.

Wheelie Bar - A wheelie bar is an absolute necessity on a vehicle with the power and speed potential of Stampede 2WD Brushless.  The reinforced wheelie bar provides additional impact resistance for the bumper and doubles as a convenient carry handle.  Larger wheels provide additional stability for Stampede's epic wheelies.

Double-Wishbone Suspension - Stampede's HD suspension arms are molded from our toughest composite to provide just enough flex to resist breaking.  The double wishbone design is stronger than standard camber links with double-shear connections for even greater impact resistance and stability.  The GTR shocks mount inside the arms for added protection.

Hex Hardware - Stampede's hex-drive hardware provides a more positive and secure connection than other fasteners.  The black-oxide coating provides a rust resistant high-tech look and feel.

3-Channel TQi Sport Receiver - The TQi Sport receiver is compatible with all TQi and TQi Sport transmitters.  A built-in failsafe returns the throttle to neutral and holds steering in the last known position in the even of signal loss.

Clipless Body Mounts - Stampede's clipless body mounts are integrated into the shock towers for extra rigidity.  New Bash Locks secure the latches in place for ultimate security during extreme bashing and high-altitude flight.

Waterproof Receiver Box - Stampede's waterproof receiver box is located between front shock towers for maximum protection.  A patented O-ring seal keeps water out, giving you the freedom to live out your wildest adventures, regardless of the weather.

Bellcrank Steering - Stampede's high-performance bellcrank steering system nearly eliminates bump steer for precise wheel placement and increased cornering stability.  A cam-operated servo saver increases steering precision while protecting the servo against impacts.

Extreme HD Components - Engineered for maximum strength, Extreme Heavy-Duty components fortify Stampede 2WD with a full complement of driveline and suspension upgrades designed to work together as a complete package.  Stampede sets a new standard for durability in extreme bash conditions.

Metal Gear Servo - Stampede 2WD features a new metal-gear servo with the durability of an all-metal gear train.  The servo delivers quick, precise control with the security and convenience of fully waterproof construction.

Clipless Battery Strap - Stampede holds batteries securely in place with the convenience of a rugged clipless battery strap.  Swing the heavy-duty strap up and out of the way to swap batteries.  Once loaded, just snap the tab into the latch and the battery stays secure until you release it.

Chassis Nerf Bars - In addition to side impact protection, Stampede's chassis nerf bars deliver support for the clipless body.  The nerf bars also provide a secure mounting point for optional underglow lighting (sold separately).

Internal Wire Routing - Stampede's wiring runs through an integrated routing channel to keep everything secure and looking great.  There are even provisions for the optional LED light kit (sold separately).

Integrated Shock Towers - Stampede's shock towers are integrated into the chassis to increase torsional rigidity.  A more rigid structure reduces flex and twist, allowing the suspension to soak up impacts without upsetting the chassis.  The shocks and suspension arms connect to the chassis through double-shear connections for superior strength.

VX3 Electronic Speed Control - The fully waterproof VX3 ESC transforms 11.1 volts of LiPo power into 50+ mph performance with the simplicity of Traxxas' EZ-Set one-button programming.  A large aluminum heat sink with cooling fan keeps temperatures down for longer run times. The VX3 comes loaded with high-tech features like race-inspired High-Resolution Linear Braking and real-time telemetry via Traxxas Link (requires optional wireless module, sold separately).

GTR Shocks - Stampede features XX-long GTR shocks at all four corners for increased suspension travel and a plush ride.  GTR shocks hold over 70% more il than standard Ultra Shocks for consistent damping performance.  Spring preload and ride height changes are as simple as turning the threaded collar and the spring retainers are captured with a screw so they can't pop off.

Extreme HD Driveshafts - Stampede's Extreme HD driveshafts are beefed up in critical areas to handle the outrageous power of the Velineon 3s brushless power system.  The large-diameter half shafts offer excellent articulation and suspension travel while putting massive torque to the ground.

Velineon V3200 Motor - Designed for 3-cell LiPo batteries, the V3200 motor is optimized for extreme power and efficiency with a large 5mm output shaft.  The patent-pending design uses ultra-high temperature sintered Neodymium magnets for massive torque and linear power. The unique low-maintenance design feature high-speed ball bearings and an integrated cooling fan for consistent power, run after run.

Magnum 272 Transmission - The Magnum 272 transmission features all metal gear internals riding on ultra-smooth sealed ball bearings and the upgraded top shaft from the 272R racing transmission.  the sealed gearbox protects the transmission components from dirt and rocks.

32-Pitch Gearing - Stampede 2WD is built for extreme power with a large 5mm motor output shaft and 32-pitch pinion and spur gears.  Nearly 1.5x larger than standard 48-pitch gears, Stampede's 32-pitch gears deliver maximum durability with reliable, long-lasting performance.