Description
MATH743WLTE Matek H743-WLITE Wing Flight Controller
Features
- Equipped with BEC 5V output, which is designed for flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Equipped with BEC 9V/12V output, which is designed for Video Transmitter, Camera, Gimbal etc.
- Equipped with MATEKH743 firmware
Includes
- 1x Matek H743-WLITE Wing Flight Controller
- 1x USB(Type-C)/Beep (Passive buzzer) Extender
- 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender
- 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- 1x Set of Dupont 2.54 pins
Specifications
- Input Voltage: 2-6S
- MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash
- IMU: ICM42688-P
- Baro: DPS310 (I2C2)
- OSD: AT7456E
- Blackbox: MicroSD card slot (SDIO)
- Uarts: 7 (1,2,3,4,6,7,8) with built-in inversion.
- PWM Outputs: 13(12+LED)
- ADC: Yes (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- Status LED: Yes
- I2C: Yes (2)
- CAN: Yes
- Dual Camera Inputs Switch: Yes
- High-precision Current Sense: 220A range
- ADC VB2 voltage divider: 1K:20K
- ADC AirSpeed voltage divider: 20K:20K
- FC Firmware: Matek H743
- Mounting Pattern: 25x25mm M2
- Dimensions: 44x29x14.5mm
- Weight: 22g
BEC Specifications
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps, Max.3A
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, Max.10A
- for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear Regulator
- Continuous current: 200mA
