Description
INDC-2826-10 Cobra C-2826/10 Brushless Motor, Kv=930
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.
The Cobra 2826 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.
Included with every Cobra 2826 Series Motor is a complete accessory package which contains the following items:
● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing
| Stator Diameter | 28.0 mm (1.102 in) |
| Stator Thickness | 26.0 mm (1.024 in) |
| Number of Stator Slots | 12 |
| Number of Magnet Poles | 14 |
| Motor Wind | 10 Turn Delta |
| Motor Kv Value | 930 RPM per Volt |
| No Load Current (Io) | 1.30 Amps @ 10 Volts |
| Motor Resistance (Rm) per Phase | 0.048 Ohms |
| Motor Resistance (Rm) Phase to Phase | 0.032 Ohms |
| Maximum Continuous Current | 45 Amps |
| Max Continuous Power (3-cell Li-Po) | 500 Watts |
| Max Continuous Power (4-cell Li-Po) | 660 Watts |
| Max Continuous Power (5-cell Li-Po) | 830 Watts |
| Motor Weight | 171 grams (6.03 oz.) |
| Outside Diameter | 35.0 mm (1.378 in.) |
| Shaft Diameter | 5.00 mm (0.197 in.) |
| Motor Body Length | 46.0 mm (1.811 in.) |
| Overall Shaft Length | 66.0 mm (2.598 in.) |
| Motor Timing | 5-10 degrees |
| PWM Frequency |
8 KHz
|
Manuals:
Additional Information
Parts & Accessories: |
Gaskets, Rings, etc. |
Motor Kv: |
501 to 1,000Kv |
Motor ESC Amps: |
35 to 59A |
Motor Voltage: |
7.4 to 14.7V |
Motors: |
Motor Sets |
