Description
INDC-2808-26 Cobra C-2808/26 Brushless Motor, Kv=1130 5MM
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.
The Cobra 2808 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.
Included with every Cobra 2808 Series Motor is a complete accessory package which contains the following items:
● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style theaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing
Stator Diameter | 28.0 mm (1.102 in) |
Stator Thickness | 8.0 mm (0.315 in) |
Number of Stator Slots | 12 |
Number of Magnet Poles | 14 |
Motor Wind | 26 Turn Delta |
Motor Kv Value | 1130 RPM per Volt |
No Load Current (Io) | 0.75 Amps @ 8 Volts |
Motor Resistance (Rm) per Phase | 0.113 Ohms |
Motor Resistance (Rm) Phase to Phase | 0.075 Ohms |
Maximum Continuous Current | 22 Amps |
Max Continuous Power (3-cell Li-Po) | 240 Watts |
Max Continuous Power (4-cell Li-Po) | 330 Watts |
Motor Weight | 80.5 grams (2.85 oz.) |
Outside Diameter | 35.0 mm (1.378 in.) |
Shaft Diameter | 5.00 mm (0.197 in.) |
Motor Body Length | 28.1 mm (1.106 in.) |
Overall Shaft Length | 48.0 mm (1.889 in.) |
Motor Timing | 5-10 degrees |
PWM Frequency | 8 KHz |
Included with every Cobra 2808 Series Motor is a complete accessory package which contains the following items:
● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style theaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubingI
Manuals:
Additional Information
Motor Kv: |
1,001 to 2,000Kv |
Motor ESC Amps: |
15 to 34A |
Motor Voltage: |
7.3V or Less |
Motors: |
Motor |