Description
DUM1814 Dumas Taylorcraft Kit 40"
Features: |
Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid requires bending
Includes: |
All balsa, lightweight colored (blue and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl.
Requires: |
GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC
2 cell 700mAh LiPo battery
GWS 8x6 prop,
Building and field equipment
Technical Specifications: |
Length: 23-7/8" (606mm)
Wingspan: 40" (1016mm)
Wing Area: 272sq.in. (17.57 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-7/8" (48mm) back from the leading edge of the wing
Control Throws-
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 7/8" (22mm)