Description
CSEP7P CASTLE CREATIONS PIXIE-7P SUB MICRO ESC PROG XX
Features:
- Microprocessor controlled
- Low Resistance (.007 Ohms)
- High rate (2800Hz) switching (PWM)
- Up to 7A continuous current (with proper air flow)
- High output (1.2A) Battery Eliminator Circuit (BEC) provides power to receiver and servos- eliminates separate receiver battery
- Three to six cells with three micro servos
- Up to eight cells with two micro servos
- Eighteen cells MAX with BEC disabled
- Programable LV Cutoff (none,3.5V,4.7V,6V,8.0V)
- Programable Motor Cutoff
- Programable throttle range
- Safe Power On arming program ensures motor will not accidentally turn ON
- Low Torque Soft Start prevents damage to fragile gearboxes
- Auto Shut Down when signal is lost or radio interference becomes severe
- Rugged Surface Mount Technology construction
Includes:
One Pixie 7P Micro ESC Instruction sheets
Requires:
Soldering into model motor system
Soldering iron
Solder Battery connector (depends what customer has)
Technical Specifications:
Length: 5/8" (15mm)
Width: 3/8" (9mm)
Height: 1/8" (3mm)
Wire Length: Motor end 4.5" (114mm) Rx Connector: 6" (152mm)
Battery end: 4.5" (114mm)
Manuals:
Additional Information
ESC Max Amps: |
Less than 20A |
ESC Max Voltage: |
Less than 14.8V |
ESCs & BECs: |
Brushless ESC |
