TRA58334-4-C TRAXXAS Slash Brushless EHD: 1/10-Scale 2WD Short Course Racing Truck with TQ 2.4GHz Radio System

Extreme HD Driveshafts

Slash’s Extreme HD driveshafts are beefed up in critical areas for outrageous power handling. The large-diameter half shafts offer excellent articulation and suspension travel and hold up to the BL-2s brushless system’s tire-shredding torque with ease.

Oil-Filled Ultra Shocks

Slash’s oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.

Chassis Nerf Bars

Tough integrated nerf bars offer side chassis protection against the fender-to-fender impacts of track competition and backyard bashing.

Long Wheelbase Chassis

Slash’s long 13.2″ wheelbase chassis provides superior stability on high-speed straights with over 3.5 inches of ground clearance to prevent bottoming out. The chassis includes drain holes and a battery tray channel for routing servo wires to the receiver.

High Torque Steering Servo

A race truck needs a powerful steering servo for responsive performance. The Traxxas 2075 waterproof digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing in the backyard or on the track.

Waterproof Receiver Box

Slash’s patented sealed receiver box gives you the freedom to drive where you want, when you want. The antenna and servo wires route neatly through a special water-tight seal. A blue O-ring seals the receiver box to protect the receiver from water.

TQ Radio System

The TQ’s advanced programming provides long-range control with smooth, glitch-free performance. 2.4 GHz technology allows you to race multiple vehicles side by side without interference. The TQ’s ergonomic design is comfortable for all day driving with an internal antenna that is impervious to damage.

Adjustable Battery Hold-Down

Slash’s innovative battery tray accommodates both flat and “hump” pack NiMH batteries. The extended tray allows the battery packs to be positioned forward or backward for front/rear weight bias tuning. An optional battery expander kit (sold separately) is available for use with oversize batteries.

Short Course Wheels & Tires

Slash’s BFGoodrich^® Mud Terrain T/A^® tires have excellent grip in the dirt and just the right amount of slide on pavement. Their authentic scale appearance and realistic performance add to the racing experience. The tires come mounted and pre-glued to 2.2″ Split-Spoke dual-profile SCT wheels.

Bellcrank Steering

Slash’s high-performance bellcrank steering system minimizes bump steer for precise wheel placement and increased cornering stability.

Adjustable Steel Turnbuckles

Heavy duty steel turnbuckles allow trackside camber and toe tuning for greater agility and high-speed performance. Captured rod ends provide unmatched durability and they won’t pop off during a race.

HD Suspension Arms

Molded from our toughest composite material, Slash’s heavy duty suspension arms provide just the right amount of flex to resist breaking. These suspension arms stand up to even the most punishing drivers for non-stop wheel-to-wheel racing.

Hex Hardware

Slash uses pro-quality, high-grade, metric hex-drive hardware throughout for extra strength and easy maintenance. The black-oxide rust-resistant finish provides a high tech look and feel.

Clipless Body Mounting

High-flying stunts won’t upset Slash’s tough clipless body. Locking tabs hold the body tightly, but release in just seconds. Slash’s hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines.

Scale Bumpers

Engineered to handle the abuse of bumper-to-bumper bashing, the scale tube-style bumpers are designed to absorb brutal impacts while looking the part of a true short course race truck.

Extreme HD Suspension Components

Slash comes outfitted with factory-installed Extreme Heavy Duty suspension components for ultimate strength and durability. The rear axle carriers, C-hubs, and steering blocks are beefed up with more material and stronger construction.

Motor Mount with Integrated Cooling Channels

The sealed gearbox protects transmission components from dirt and rocks. The molded motor plate includes finned cooling channels that work in conjunction with the motor’s internal fan to pull air through the motor for superior cooling.

Magnum 272^™ Transmission

The Magnum 272’s all metal gears ride on ultra-smooth sealed ball bearings. The bulletproof Torque-Control^™ slipper clutch and metal transmission gears are ready to handle any power system upgrade including the extreme Velineon^® brushless power system.

Torque-Control Slipper Clutch

Semi-metallic pads and finned aluminum alloy pressure plates dissipate heat and provide consistent traction. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement. Spur gears can be removed and replaced without altering the slipper adjustment.

Planetary Gear Differential

The planetary gear differential uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance, and its efficient design puts maximum tire-shredding power to the wheels.

Rubber-Sealed Ball Bearings

Rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dusty environments. They are used in all exposed locations on the truck and are virtually maintenance free.