Description
TRA4007 Traxxas TRX Pro .15 IPS Shaft w/Pull Start
Note: Graves RC Coupons are not applicable with this product
| Features: |
- ABC (Aluminum Brass Chrome) Construction
- Oversized Machined Aluminum Blue/Silver Anodized Cylinder Head
- Channelled Beam Connecting Rod for Improved Oil Flow
- Precision Ball Bearings
- Large-Bore, High-Flow Carburetor
- Double O-Ring Seals on High and Low Needles
- Industry-Standard Mounts and Crankshaft Lengths to Fit Most
- Applications.
| Includes: |
One Assembled Engine With Pull Starter
One Air Cleaner (Black rubber with Black foam element)
One Full Instruction Book and Parts Exploded View
One "Traxxas" Decal Sheet
Installed Glow Plug (standard long--no idle bar)
| Technical Specifications: |
According to Traxxas, this engine will produce 20% more power than the TRX-12, which is approximately 9-11% more power than the OS CZ-Z. These figures are tested on a dyno (loaded) which provides power curves on a computer. Traxxas was not able to provide any numbers on BHP, bore, stroke etc. Keep in mind that these figures are often useless, as they will vary from engine to engine. And there are other variables to consider: the kit, terrain, %nitro in fuel, etc......
Overall Length (front end of shaft to back of starter): 92mm (3-5/8")
Height (top of cylinder head to bottom of backplate): 93mm (3-5/8")
Width (cylinder head): 41mm (1-1/2")
Mount holes (center to center): left to right: 31mm (1-1/4")
front to back: 11mm (7/16")
Overall width of mounting ears (where the holes are): 40mm (1-9/16")
***Mount the same as an OS .12 and .15 CV***
| Requires: |
A 1/10 scale kit to put it into and 5%-20% Glow Fuel.
Additional Information
Cylinders: |
1 |
Displacement: |
Less than 0.20 cubic inch (3.2cc) |
Parts & Accessories: |
Nitro (2-Stroke) |
