Description
KYO32540GM KYOSHO Mini-Z 4x4 Readyset Toyota 4Runner (Hilux Surf) with Accessory Parts - Dark Gray Metallic
THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING
Description
The combination of the highly-detailed body and 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.
● Adopts full-fledged solid axle links similar to the 1/10 scale models, ensuring the driving performance and wheel travel required for crawler models.
● Equipped with a specially tuned high-torque 130 motor. Additionally, the main gear unit features a slipper clutch that protects the drive system by releasing torque when under heavy load.
● Features a high-torque servo specifically designed for crawler models, capable of supporting authentic crawling performance. The steering link optimization achieves the largest steering angle in Mini-Z history.
● Full bearing specification with a total of 18 ball bearings. Metal gears, known for their durability, are used in parts that bear heavy loads.
● The "KT-531P" transmitter uses the FHSS 2.4GHz system and features a sponge on the steering wheel to enhance operability.
● Comes as a fully assembled, ready-to-run model, requiring only the insertion of batteries to begin operation.
● An optional light set (MZW429R) can be installed on the top of the circuit board. The lights respond to throttle operation, and the headlight's lighting interval can be adjusted freely—from steady lighting to blinking—via the transmitter's trim.
● Supports the separately sold gyro unit, and like the RWD/AWD series, manual adjustments can be made via the volume control.
● Equipped with popular BS Goodrich tires.

The 4WD Toyota 4Runner SUV debuted in 1983 and was first released in the U.S., where demand was higher than in Japan. This model featured an FRP canopy on the bed of a compact pickup, increasing its seating capacity. With a powerful engine and rugged suspension, it handled rough terrain with ease.

The same ladder frame and multi-link rigid-axle suspension commonly used in popular 1:10-scale off-road models, is condensed into Mini-Z size for the most articulation and performance available in any mini RC truck.

The Mini-Z 4x4 incorporates a ladder frame design with steel vertical plates, in combination with various molded parts, to deliver the ultimate balance of of rigidity and flex for superior performance and durability.

Solid front and rear axles feature links with steel rods and captured rod ends. Ring and pinion gears, in addition to other gears and components, feature metal construction to withstand the heavy loads under the toughest driving conditions.

The front axle features ideal Ackermann geometry. Combined with the advanced design of the axle housing and the other steering components, This model features the tightest turning radius in Mini-Z history. It means the Mini-Z 4x4 has exceptional handling capability for anything ranging from casual driving to hard-core crawling.

Tires and wheels that are specific to each model are a major focus of the Mini-Z 4x4.

Metal gears are used in areas subject to high loads to ensure durability.

The Mini-Z 4x4 features a specially-designed high-torque motor that is unique in the Mini-Z World. It's optimized for maximum torque, and it develops more power at lower speeds.

The best drive efficiency is accomplished with the included set of 18 ball bearings, factory installed to ensure the smoothest most efficient operation possible, right out of the box.
Technical Data
■Length 200.5mm
■Width 87mm
■Height 104.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 238/g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1 / 46.20:1 / 39.60:1 / 34.65:1 / 30.80:1 / 27.72:1
■Front Tire Φ42.0mm
■Rear Tire Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed:Approx. 2.7km/h-5.4km/h (Pinion gears 10T-20T)
■Running Time Approx. 60 mins
Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set(10T, 12T, 14T, 16T, 18T, 20T)
●3 types of pinion gear spacers
Requirement to Run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis (Alkaline or NiMH)
Additional Information
Oversized Item: |
Yes |
Model Type: |
Crawler |
Power: |
Electric |
Completeness: |
RTR-Ready to Run |