INDS2-2212-1850 Scorpion SII-2212-1850 Brushless Outrunner

INDS2-2212-1850 Scorpion SII-2212-1850 Brushless Outrunner

Scorpion SII-2212-1850 Brushless Outrunner

The Scorpion SII-2212 motors come with 3.5mm male bullet connectors already soldered on to the motor leads, and also include 3 matching female bullet connectors for your speed controller, along with a cross style motor mount with 4 mounting screws, a threaded shaft style prop adapter and a prop saver type prop adapter with O-Rings.

Features:

• New cooling fan design that works equally well in either direction of rotation.
• New stator design to concentrate the magnetic fields at the pole faces.
• New stator plate alloy to increase efficiency and reduce heat losses.
• New flux ring alloy to contain more of the magnetic field within the motor.
• The higher efficiency of the motor naturally lowers the Kv of the motor, so to get the Kv back up, fewer turns of heavier gauge wire are used. This lowers the internal resistance (Rm) of the motor and increases the current handling ability.
• All Scorpion motors are built to exacting tolerances on state of the art CNC machines for the highest level of fit and finish.
• The stators are all hand-wound to insure the highest copper fill rate and high voltage tested to insure that no shorts are present.
• All the metal motor parts are electro-coated in a beautiful black and gold finish so the motors look as good as they perform.
• To top off the high quality fit and finish of these motors, Scorpion backs them with a 2-year warranty against defects in materials and workmanship. (Due to the nature of ball bearings, and the fact that they can be easily damaged by prop strikes or by getting dirt in them, the ball bearings are not covered under the two-year warranty.)

Specifications:

Stator Diameter ................................... 22.0 mm (0.866 in)
Stator Thickness .................................. 12.0 mm (0.315 in)
No. of Stator Arms ....................................................... 12
No. of Magnet Poles ...................................................... 14
Motor Wind .................................................. 11 Turn Delta
Motor Wire ............................. 9-Strand 0.21mm (31 AWG)
Motor Kv .................................................. 1850 RPM / Volt
No-Load Current (Io) ........................ 1.31 Amps @ 10 Volts
Motor Resistance (Rm) .................................... 0.032 Ohms
Max Continuous Current ...................................... 22 Amps
Max Continuous Power ....................................... 230 Watts
Weight .............................................. 58.0 Grams (2.05 oz)
Outside Diameter ................................. 27.9 mm (1.098 in)
Shaft Diameter ..................................... 2.98 mm (0.117 in)
Body Length ......................................... 30.0 mm (1.181 in)
Overall Shaft Length ............................. 49.0 mm (1.929 in)

Manuals:

INDS222121850-Prop-Chart-English

INDS222121850-Diagram-English