INDS2-2205-1585 Scorpion 2205-1585 V2 Brushless Outrunner Motor

INDS2-2205-1585 Scorpion 2205-1585 V2 Brushless Outrunner Motor

Scorpion 2205-1585 V2 Brushless Outrunner Motor

Features:

• New cooling fan design that works equally well in either direction of rotation.
• New stator design to concentrate the magnetic fields at the pole faces.
• New stator plate alloy to increase efficiency and reduce heat losses.
• New flux ring alloy to contain more of the magnetic field within the motor.
• The higher efficiency of the motor naturally lowers the Kv of the motor, so to get the Kv back up, fewer turns of heavier gauge wire are used. This lowers the internal resistance (Rm) of the motor and increases the current handling ability.

Includes:

(1) Scorpion SII-2205-1585KV Motor
(1) Scorpion 22mm Cross Mount
(1) Scorpion 3mm Threaded Prop Adapter
(3) Female Connectors
(3) Heat Shrink
(4) M3 Screws

These new motors still use the same high quality magnets and wire that set the original Scorpion motors apart from the rest of the field, so you can rest assured that the new SII-22mm series motors are built to last.

The Scorpion SII-2205 motors come with 3.5mm male bullet connectors already soldered on to the motor leads, and also include 3 matching female bullet connectors for your speed controller, along with a cross style motor mount with 4 mounting screws, a threaded shaft style prop adapter and a prop saver type prop adapter with O-Rings.

All Scorpion motors are built to exacting tolerances on state of the art CNC machines for the highest level of fit and finish. The stators are all hand-wound to insure the highest copper fill rate and high voltage tested to insure thta no shorts are present. All the metal motor parts are electro-coated in a beautiful black and gold finish so the motors look as good as they perform.

To top off the high quality fit and finish of these motors, Scorpion backs them with a 2-year warranty against defects in materials and workmanship. (Due to the nature of ball bearings, and the fact that they can be easily damaged by prop strikes or by getting dirt in them, the ball bearings are not covered under the two-year warranty.)

Specifications:

Stator Diameter 22.0 mm (0.866 in)
Stator Thickness 5.0 mm (0.197 in)
No. of Stator Arms 12
Magnet Poles 14
Motor Wind 34 Turn Delta
Motor Wire 4-Strand 0.17mm
Motor Kv 1585 RPM / Volt
No-Load Current (Io/10V) 0.47 Amps
Motor Resistance (Rm) 0.182 Ohms
Max Continuous Current 10 Amps
Max Continuous Power 110 Watts
Weight 35.4 Grams (1.21 oz)
Outside Diameter 27.9 mm (1.13 in)
Shaft Diameter 2.98 mm (0.12 in)
Body Length 23.0 mm (0.9 in)
Overall Shaft Length 42 mm (1.65 in)
Max Lipo Cell 3s

Manuals:

INDS222051585-Prop-Chart-English

INDS222051585-Diagram-English