Description
HITD485HW HITEC D485HW Karbonite Servo
Specifications:
| Dimensions | 1.57" x 0.78" x 1.49" (39.8 mm X 19.8 mm X 38.0 mm) |
|---|---|
| Product Weight | 1.59 oz (45.0 g) |
| Output Shaft Style | 25 tooth (H25T) spline |
| Voltage Range | 4.8 V - 7.4 V |
| No-Load Speed (4.8V) | 0.20 sec/60° |
| No-Load Speed (7.4V) | 0.15 sec/60° |
| Stall Torque (4.8V) | 67 oz-in. (4.82 kg.cm) |
| Stall Torque (7.4V) | 103 oz-in (7.41 kg.cm) |
| Max PWM Signal Range (Standard) | 850-2350 μsec |
| Travel per µs (out of box) | .098°/μsec |
| Travel per µsec (reprogrammed) | 0.135°/μsec |
| Max Travel (out of box) | 147° |
| Max Travel (reprogrammed) | 203° |
| Pulse Amplitude | 3-5 V |
| Operating Temperature | -20°C to +60°C |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 1 µs |
| Motor Type | 3 Pole Cored Carbon Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Top Ball Bearing |
| Gear Type | Straight Cut Spur |
| Gear Material | MK 1st Gear & 3 Karbonite Resin Gears |
| Wire Length | 11" (279.4 mm) |
Additional Information
Max Voltage: |
7.4v |
Min Voltage: |
4.8v |
Gear Material: |
Karbonite |
Modulation: |
Digital |
Motor: |
3- Pole |
Servo Name: |
D485HW |
Power: |
4.8v - 7.4v |
Size: |
Standard |
Speed 4.8V: |
0.20 sec/60° - 0.29 sec/60° |
Speed 6.0V: |
0.10 sec/60° - 0.19 sec/60° |
Speed 7.4V: |
0.10 sec/60° - 0.19 sec/60° |
Spline: |
F3 |
Torque 4.8V: |
60-69 oz - in |
Torque 7.4V: |
100-109 oz - in |
Weight: |
1.5 - 1.99 oz |
