Description
HBW30902090 HobbyWing XRotor Micro 45A 4in1 ESC BLHeli32 Dshot1200 6S for FPV Pilots
Features:
- high performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
- BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
- All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
- The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
- The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
- Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
- The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
- On board 10V &5V BEC , powering different accessories such as FC , VTX ,Camera and LED lights and etc.
Specifications:
Application | FPVs with 130-280mm Diagonal Wheelbase |
LiPo Power input | 3S-6S |
Cont.Current
|
45Ax4 |
Burst Current | 60Ax4 |
BEC Output |
5V@1.5A / 10V@1.5A
|
Input wires | 12AWG-130mm* (Red/Black) |
Output Wire | No wires but solder tabs |
Connectors (In/Out) |
XT60 (w/ Wires Soldered on) /no |
Weight / Size | 11.5g / 32.7x18.4x6.2mm |
Mounting holes | 30.5x30.5mm |
Throttle Calibration | Supported |
ESC Programming | BLHeliSuite32 |
DEO | Supported |
OneShot Mode | Supported |
Timing | Supported |
Motor Rotation | Supported |
Additional Information
ESC Max Amps: |
40A to 59A |
ESCs & BECs: |
Brushless ESC |
Parts & Accessories: |
Nitro (2-Stroke) |