GPMQ4553 GP 2 1/4 ALUMINUM SPINNER

GPMQ4553 GP 2 1/4 ALUMINUM SPINNER

This is a Two-Blade Aluminum Spinner w/Aluminum Backplate from Great Planes.

Features:

• Machined For Accuracy, Then Polished To A Gleaming Finish.
• Easy To Install, Having A Bolt-On Design, Centers Each Spinner
• Perfectly On Its Baseplate.
• Spinner Cone Is Recessed To Mate Into the Spinner Backplate. The Rear
• Of The Spinner Is Flat, Without An Overhanging Cone.
• Includes Black 10-32 Bolt That Holds Spinner Cone to Backplate.
• Adapter Kits For Different Engine Sizes Are Available Separately.
  (See COMMENTS)

Includes:

One Aluminum Spinner Cone
One Aluminum Backplate (See Specs For Sizes)
One 10-32 x 1" Mounting Bolt
One Box with Installation Instructions and Safety Tips

Requires:

One Spinner Adapter Kit (See COMMENTS)

Technical Specifications:

Spinner Backplate Diameter: 2-1/4" (57mm)
Spinner Backplate Mounting Ring Thickness: 3/16" (4mm)
Spinner Backplate Hole Diameter: 3/8" (9.5mm)
(The Adapter Kit Will Contain An Aluminum Bushing To Fit The
Crankshaft Size.)
Length From Back Of Backplate To Front Of Cone: 2-1/4" (57mm)
Height Of Propeller Slot: 3/4" (19mm)
Length Of Propeller Slot: 13/16" (21mm)

Comments:

Warning: Failure To Follow The Instructions Printed On The Box May
Cause The Propeller To Separate From The Model.
If The Spinner Cone Touches The Propeller At Any Point, Use A File
Or MotoTool To Relieve This Area.
Spinner Adapter Kit To Use Will Be Determined By Engine Crankshaft
Size. Use One Of The Following:
 - OS Max 20-40 FP, 25-46 FX & SF (1/4")
 - OS Max 60 FP, 61 FX & SF, SuperTigre 61 (5/16")
 - OS Max FS 26-52 Surpass (1/4")
 - OS Max FS 70-120 Surpass, 140 RX (5/16")
 - OS Max 1.08 FSR (3/8")
 - SuperTigre S 2500-4500 (10mm)