FMM107P FMS Fox 3000mm Aerobatic EP Glider PNP

FMM107P FMS Fox 3000mm Aerobatic EP Glider PNP

THIS IS AN OVERSIZED ITEM THAT DOES NOT QUALIFY FOR FREE SHIPPING

Note: Graves RC Coupons are not applicable with this product  

Construction: EPO foam, repairs can be made with foam safe adhesives
such as hot glue, foam safe CA and 5 minute epoxy, two-part
fuselage with twist lock design, plug type horizontal stabilizer
requires no glue or hardware for installation
Wing: Two-piece with functional flaps, and 1.8mm thick carbon fiber
wing tube
Canopy: Clear plastic with painted pilot bust and instrument panel
detail
Motor: 4258-Kv460
Electronic Speed Control: 70A with EC3 battery connector
Servos: Six high torque 23g metal gear
Propeller: 7.5x15 folding, aluminum construction
Landing Gear: Scale wheels embedded into fuselage, wing tips and
tail, 3.3" (85mm) diameter main landing wheel

FMS FOX 3000mm Electric Powered Glider with Brushless Motor, 70A ESC,
six Servos, Folding Propeller and Instruction Manual

Radio: 6-channel with receiver
LiPo Battery: 6S 22V 5000mAh 35C
Battery Charger: Compatible with selected LiPo battery
Charging bag and field equipment

Wingspan: 9.8' (3000mm)
Length: 6.1' (1873mm)
Weight: 10.3lbs (4700g)
Wing Loading: 21.14 oz/sq ft (64.5g/sq dm)
Assembly Time: 10 minutes
Approximate Flying Duration: 30 minutes
Center of Gravity (CG): 3.5 - 3.7" (90 - 95mm) back from leading
edge of wing measured at the fuselage
Control Throws Low Rate High Rate
Elevator 0.63" (16mm) 0.79" (20mm)
Aileron 0.47" (12mm) 0.71" (18mm)
Rudder 0.79" (20mm) 0.94" (24mm)