Description
EFL013856 E-FLITE Hardware Set: Timber 10-year, Night Timber X Evolution 1.2m
Note: Graves RC Coupons are not applicable with this product
Description
Replacement hardware set for E-flite Night Timber RC airplane.
Replacement Part for:
- E-Flite Night Timber X Evolution 1.2m
- E-Flite Timber 1.5m 10th Anniversary Special Edition
In The Box
- Wing Hold Down Nylon Screws M4 x 30mm - 2
- Nylon Pushrod Keepers - 2
- Wing Mount Joiner Bracket - 1
- Prop Nut M6 - 1
- Prop Washer M6 - 1
- Tail Wheel Nylon Retainer Nut - 1
- Brass Top Hat Spring Washers 3 x 6 x1 0mm - 4
- Axle Washers 3mm - 4
- Motor Mount Washers 3mm - 4
- Main Gear Axle Nuts M3 - 4
- Spring Securing Screws 3mm x 16mm - 2
- Motor Mount Screws M3 x 30mm - 4
- Main Gear Axles -
- Landing Gear Pivot Retainer Securing Screws 2.5mm x 16mm - 8
- Prop Adapter M2.5 x 8mm - 4
- Main Landing Gear Securing Screws M2.5 x 10mm - 4
- Rear Float Mount Securing Screws 3mm x 10mm - 2
- Cowl Securing Screws 2mmx10mm - 3
- Tail Wheel Tiller Mounting Screws 2.5mm x 10mm - 3
- Aileron and Flap Servo Mounting Plate Screws 2mm x 8mm - 12
- Motor “X” Mount Screws M3 x 6mm - 4
- EZ Connector Securing Screws M2.5 x 5mm - 2
- Stabilizer Securing Screws 2.5mm x 12mm - 2
- Spinner Securing Screw M3 x 8mm - 1
- Rudder Hinge Screw M2 x 10mm - 1
- Rudder and Elevator Servo Securing Screws 2.5mm x 8mm - 4
