DLE120 DLE Engines DLE-120cc Twin Gas w/Electronic Ignition

DLE120 DLE Engines DLE-120cc Twin Gas w/Electronic Ignition

THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING

Note: Graves RC Coupons are not applicable with this product  

This is the DLE 120cc Twin Cylinder Gasoline Engine.

Features:

• 50 lbs of static thrust-ideal for intense 3D manuevers
• Electronic ignition for faster first time starts, smooth idling and superb throttle transition
• Twin opposed cylinders reduce vibration and increase performance
• Sealed crankshaft ball bearings
• Alloy crankcase
• Matched aluminum mufflers
• Two year limited warranty through Hobby Services beginning at date of purchase

Includes:

DLE 120cc Gasoline Engine, two Mufflers, Ignition Module, two NGK CM6
Spark Plugs, spiral Wire Wrap, Connector Clips, Instruction
Manual and four 0.98" (25mm) Standoffs

Requirements:

87- 93 octane gasoline
2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
Propeller: 26 x 10, 26 x 12, 27 x 10, or 28 x 10 depending on aircraft
Ignition Battery: 6.6V

Specifications:

Displacement: 7.32 cu in (120cc)
Horsepower: 12HP/7,500 RPM
Idle Speed: 1300 RPM
Ignition: Electronic
Bore: 1.85" (47mm) x 2
Stroke: 1.38" (35mm)
Compression Ratio: 10.5:1
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude 18.7 lb (8.5 kg) @ 1,800 feet altitude
Carburetor: DLE with manual choke
Weight: Engine, 5.08lbs (2306g) Muffler 1, 3.6 oz (103 g) Muffler 2, 3.9 oz (111 g) Electronic Ignition, 5.3oz (149g)
Engine Mount Standoffs: 1.4oz (141g)
Total Weight: 6.13lbs (2781g)
Fuel: 87- 93 octane gasoline with a 30:1 2-cycle oil mixture Carburetor;
Idle Adjustment Screw: Turn clockwise to increase idle speed, counter-clockwise to decrease idle speed
Low Speed Needle: 1.25 turns from closed
High Speed Needle: 1.5 turns from closed-both needles preset at factory
Distance between Cylinder Heads: 9.8" (250mm)
Cylinder Head Diameter: 3.14" (80mm)
Standoff Length: 0.79" (20mm)
Length/back of Crankcase to Prop Drive Hub: 6.5" (166mm)
Width from Carb to Crankshaft Center: 4.6" (116mm)

Manuals:

DLE120CC-Manual-English