Description
CSEPHX25 CASTLE CREATIONS PHOENIX 25 BRUSHLESS ESC
Features:
- Extremely low resistance (.013 Ohms)
- High rate (11kHz) switching
- Up to 25A continuous current with proper air flow, 35A surge
- Five to eight cells with four micro servos
- Up to ten cells with three micro servos
- Sixteen cells max with BEC disabled
- Dynamic braking ensures folding props fold properly
- BEC (1.5A) provides power to receiver and servos-eliminates need for a separate receiver battery
- User programmable features:
- Low voltage cutoff
- Over-current protection
- Brake type
- Throttle range
- Timing advance
- Cutoff type
- Soft start ramp up
- Runs motor in forward or reverse
- Auto motor in cutoff with reset
- Safe Power ON arming program ensures motor will not accidentally turn ON
- Low torque soft start prevents damage to fragile gearboxes
- Auto Shut Down when signal is lost or radio interference becomes severe
Includes:
Instruction sheets Phoenix 25 ESC
Requires:
Soldering to motor and connector
Soldering iron
Solder Battery connector (specific to customer's connectors)
Technical Specifications:
Length: 1.5" (37mm)
Width: 1" (25mm)
Height: 3/16" thick (5mm)
Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end 7" (178mm) servo wire with Universal connecter
Manuals:
