CSE010011506 Castle Creations 1/10 SV3 Sidewinder WP ESC 1406-5700

CSE010011506 Castle Creations 1/10 SV3 Sidewinder WP ESC 1406-5700

Sidewinder SV3 12V ESC

• Recommended for all 1/10 scale buggy and truggy applications that weigh less than 5lbs (2.25kg) ready to run (not for use in heavier vehicles such as E-Revos or E-Maxx class vehicles)
• USB programming capability via Castle Link USB adapter (not included)
• Waterproof for use in nearly every environment (not intended for operation while submerged in liquid)
• Compatible with the Castle Creations 14xx series NeuCastle motors
• Reversible with reverse lockout

1406 5700Kv Sensored Brushless Motor

• For 2WD short course trucks on 2S LiPos geared conservatively, 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and limited runs on 3S LiPos with conservative gearing, also ideal for 1/10 scale on road cars running on 2S and 3S LiPo power
• Four pole configuration for maximum efficiency at high RPM 

Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned Leads, 4mm Female Bullets for Motor Connection, Receiver Connector On/Off Switch, and Instructions 1406 5700Kv Sensored Brushless Motor with Sensor Wire 

ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no battery connector
Motor;
Input Voltage Range: 2-3S LiPo, 6-8 cell NiMH
Kv: 5700
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

Manuals:

CSE010011506-Manual-English

CSE010011506-Quick-Start-Guide-English

CSE010011506-Gearing-Chart-English

CSE010011506-Sensored-Motor-Quick-Start-Guide-English